BMLHZ - F-1 TRU-TEST SUPREME ALKYD FLAT, WHITE

  • MSDS: BMLHZ
  • Manufacturer: TRU TEST MANUFACTURING CO
  • Product Name: F-1 TRU-TEST SUPREME ALKYD FLAT, WHITE
  • National Stock Number: 8010-00F021229
Product Identification

Product ID:F-1 TRU-TEST SUPREME ALKYD FLAT, WHITE
MSDS Date:07/24/1990
FSC:8010
NIIN:00F021229
MSDS Number: BMLHZ

Responsible Party
TRU-TEST MANUFACTURING CO
201 JANDUS RD
CARY, IL 60013

Emergency Phone: (800) 228-5635

Info Phone: (708) 639-5383

Cage: TRUTE

Contractor
TRU-TEST MANUFACTURING CO
CARY, IL 60013 US

Telephone: 708-639-5383

Cage: TRUTE

Ingredients

MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES

CAS: 64742-88-7

Fraction By Weight: 30%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


TALC (POWDER), (ASBESTOS FREE), TALCUM, MAGNESIUM SILICATE

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 11-16%

OSHA PEL 20 MPPCF

ACGIH TLV: 2 MG/CUM (RESP DUST)


<450 GM/L

RTECS: 9999999VO


11.6

RTECS: 9999999WG

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: DRYNESS.
INHALATION: HEADACHE, DIZZINESS, & NAUSEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: DRYNESS. INHALATION:
HEADACHE, DIZZINESS, & NAUSEA.

First Aid

First Aid:EYES: FLUSH W/FRESH WATER. SKIN: WASH W/WARM WATER & SOAP.
INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION IF
BREATHING STOPS. INGESTION: DON'T INDUCE VOMITING. KEEP WARM &
QUIET. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:105F
Lower Limits:0.9%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, OR WATER FOG
Fire Fighting Procedures:TREAT AS A VOLATILE LIQUID FIRE. WATER SPRAY
MAY BE INEFFECTIVE. IF WATER IS USED, FOG NOZZLES ARE PREFERED.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. COMBUSTIBLE LIQUID.

Accidental Release

Spill Release Procedures:ELMINATE IGNITION SOURCES. CONTAIN SPILL,
ABSORB LIQUID W/CLAY, SAND OR FLOOR ABSORBENT. PREVENT RUN-OFF TO
SEWERS, STREAMS OR OTHER BODIES OF WATER.

Handling

Handling and Storage Precautions:CONTAINERS SHOULD BE GROUNDED WHEN
POURING. AVOID FREE FALL OF MORE THAN 2-3 INCHES WHEN POURING.
Other Precautions:DON'T TAKE INTERNALLY. AVOID CONTACT W/SKIN.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR
IF >TLV. APPROVED MECHANICAL FILTER TO REMOVE SOLID AIRBORNE
PARTICLES OF OVERSPRAY DURING APPLICATION.
Ventilation:MECHANICAL/GENERAL OR LOCAL EXHAUST TO KEEP Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING OR USING
BATHROOM. DON'T REUSE CONTAMINATED CLOTHING.
Supplemental Safety and Health
BOILING RANGE: 300-380F.

Chemical Properties

Boiling Pt:B.P. Text:SEE SUPP.
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:WHITE LIQUID
Percent Volatiles by Volume:60%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES

Disposal

Waste Disposal Methods:CONTAMINATED ABSORBENT MAY BE DEPOSITED IN A
LANDFILL IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
COMBUSTIBLE LIQUID.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.